Español
Portuguese
Italiano
HPE Aruba 2930F 8G PoE+ 2SFP+ - Switch - JL258A
| Expansion / Connectivity | |
|---|---|
| Interfaces |
8 x 1000Base-T RJ-45 PoE+ 2 x Gigabit / 10Gbit LAN SFP+ 1 x serial (console) |
| Expansion Slots |
1 (total) / 1 (free) x expansion slot |
| Installed Modules Qty (Max) |
0 (installed) / 2 (max) |
| Power | |
|---|---|
| Power Device |
External power adapter |
| Installed Qty |
1 |
| Voltage Required |
AC 120/230 V |
| Miscellaneous | |
|---|---|
| Included Accessories |
4 rubber feet, rack mount kit, mounting screws, table mounting kit |
| Compliant Standards |
CISPR 22 Class A, CISPR 24, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, ICES-003 Class A, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1-07 Second Edition, VCCI Class A, IEC 60825-1:2007, CNS 13438, EN 55024:2010, EN 55022:2010, EN 60825-1:2007, FCC CFR47 Part 15 A, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC60950-1:2005+A1:2009+A2:2013 |
| Software / System Requirements | |
|---|---|
| Software Included |
Command Line Interface (CLI), HP Web browser, HP Intelligent Management Center |
| Dimensions & Weight | |
|---|---|
| Width |
10 in |
| Depth |
10 in |
| Height |
1.7 in |
| Weight |
4.41 lbs |
| General | |
|---|---|
| Device Type |
Switch - 8 ports - L3 - managed - stackable |
| Enclosure Type |
Rack-mountable 1U |
| Subtype |
Gigabit Ethernet |
| Ports |
8 x 10/100/1000 (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ (uplink) |
| Power Over Ethernet (PoE) |
PoE+ |
| PoE Budget |
125 W |
| Performance |
Throughput: 41.7 Mpps Switching capacity: 56 Gbps Latency (1 Gbps): 3.8 µs Latency (10 Gbps): 1.6 µs |
| Capacity |
Jumbo frame size: 9220 IPv4 routing table entries: 10000 IPv6 routing table entries: 5000 |
| MAC Address Table Size |
32K entries |
| Routing Protocol |
OSPF, RIP, RIP-1, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, static IP routing, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, RIPng, MLD, CIDR |
| Remote Management Protocol |
SNMP 1, SNMP 2, RMON 1, SNMP, Telnet, SNMP 3, SNMP 2c, SSH, SSH-2, CLI, XRMON |
| Encryption Algorithm |
MD5, SSL |
| Authentication Method |
RADIUS, PAP, CHAP, TACACS, TACACS+ |
| Features |
Flow control, full duplex capability, DHCP support, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, DiffServ support, IPv6 support, SNTP support, sFlow, Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, DHCP server, STP Root Guard, Uni-Directional Link Detection (UDLD), fanless, LLDP support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), MAC address lockout, dynamic ARP protection, DHCP protection, Dynamic VLAN Support (GVRP), Multiple VLAN Registration Protocol (MVRP), Neighbor Discovery Protocol (NDP), Class of Service (CoS), Type of Service (ToS), OpenFlow support, CPU protection, Internet Control Message Protocol (ICMP), ICMP Router Discovery Protocol (IRDP), Virtual Extensible LAN (VXLAN), Management Information Base (MIB) II |
| Compliant Standards |
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX |
| Processor |
1 x ARM Cortex-A9: 1.016 GHz |
| RAM |
1 GB DDR3 SDRAM |
| Flash Memory |
4 GB |
Click HERE to see any detail of the product.
JL258A
16 other products in the same category:
HPE Aruba 2930F 8G PoE+ 2SFP+ - Switch -