HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch (min. 1 PWR required) - JH326A
Management features | |
---|---|
Web-based management: | Y |
Quality of Service (QoS) support: | Y |
Switch type: | Managed |
Switch layer: | L3 |
Design | |
---|---|
Product colour: | Black |
Rack mounting: | Y |
Form factor: | 1U |
Stackable: | Y |
Performance | |
---|---|
Flash memory: | 512 MB |
Internal memory: | 2048 MB |
Memory type: | SDRAM |
Weight & dimensions | |
---|---|
Weight: | 12.5 kg |
Width: | 439.9 mm |
Depth: | 460 mm |
Height: | 43.7 mm |
Networking | |
---|---|
Networking standards: | IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u |
10G support: | Y |
Full duplex: | Y |
IP routing: | Y |
Flow control support: | Y |
Link aggregation: | Y |
Broadcast storm control: | Y |
Spanning tree protocol: | Y |
Auto MDI/MDI-X: | Y |
VLAN support: | Y |
Auto-sensing: | Y |
Power | |
---|---|
Power consumption (typical): | 75 W |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power consumption (max): | 670 W |
Operational conditions | |
---|---|
Operating temperature (T-T): | 0 - 45 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90 % |
Storage relative humidity (H-H): | 5 - 95 % |
Data transmission | |
---|---|
MAC address table: | 32768 entries |
Switching capacity: | 216 Gbit/s |
Jumbo frames support: | Y |
Throughput: | 190.5 Mpps |
Latency (1 Gbps): | 5 µs |
Packet buffer memory: | 4 MB |
Latency (10 Gbps): | 3 µs |
Ports & interfaces | |
---|---|
Basic switching RJ-45 Ethernet ports quantity: | 48 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Installed SFP+ modules quantity: | 4 |
Security | |
---|---|
DHCP features: | DHCP server,DHCP client |
Access Control List (ACL): | Y |
Power over Ethernet (PoE) | |
---|---|
Power over Ethernet (PoE): | Y |
Total Power over Ethernet (PoE) budget: | 1440 W |