HPE 5510 24G 4SFP+ HI Switch (min. 1 PWR required) -JH145A
Expansion / Connectivity | |
---|---|
Interfaces |
24 x 1000Base-T RJ-45 1 x console RJ-45 management |
Expansion Slots |
1 (total) / 1 (free) x expansion slot |
Installed Modules Qty (Max) |
0 (installed) / 1 (max) |
Power | |
---|---|
Power Device |
Internal power supply |
Installed Qty |
0 (installed) / 2 (max) |
Miscellaneous | |
---|---|
Rack Mounting Kit |
Included |
Compliant Standards |
RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, CAN/CSA C22.2 No. 60950-1, EN 60825-2 |
Dimensions & Weight | |
---|---|
Width |
17.3 in |
Depth |
14.2 in |
Height |
1.7 in |
Weight |
16.53 lbs |
General | |
---|---|
Device Type |
Switch - 24 ports - managed - stackable |
Enclosure Type |
Rack-mountable 1U |
Subtype |
Gigabit Ethernet |
Ports |
24 x 10/100/1000 + 4 x Gigabit SFP + 4 x 10 Gigabit SFP+ |
Performance |
Routing/switching capacity: 288 Gbps Throughput: 214 Mpps |
Jumbo Frame Support |
Yes |
Routing Protocol |
OSPF, RIP, IS-IS, BGP, VRRP, PIM-SM, static IP routing, PIM-DM, OSPFv3, PIM-SSM, ECMP, RIPng, IS-ISv6, MPLS, Bidirectional Forwarding Detection (BFD) |
Remote Management Protocol |
SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, CLI |
Features |
Layer 3 switching, DHCP support, ARP support, MPLS support, auto-uplink (auto MDI/MDI-X), IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), Rapid Ring Protection Protocol (RRPP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), STP Root Guard, IPv4 support |
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.1ad, IEEE 802.1ab (LLDP) |
RAM |
2 GB SDRAM |
Flash Memory |
512 MB |