Español
Portuguese
Italiano
HPE 5510 48G PoE+ 4SFP+ HI Switch (min. 1 PWR required) - JH148A
| Expansion / Connectivity | |
|---|---|
| Interfaces |
48 x 1000Base-T RJ-45 1 x console RJ-45 management 4 x 10Gbit LAN SFP+ |
| Expansion Slots |
1 (total) / 1 (free) x expansion slot |
| Installed Modules Qty (Max) |
0 (installed) / 1 (max) |
| Power | |
|---|---|
| Power Device |
Internal power supply |
| Installed Qty |
0 (installed) / 2 (max) |
| Power Redundancy |
Optional |
| Power Redundancy Scheme |
1+1 (with optional power supply) |
| Voltage Required |
AC 120/230 V |
| Power Consumption Operational |
670 Watt |
| Miscellaneous | |
|---|---|
| Rack Mounting Kit |
Included |
| Compliant Standards |
EN55024, AS/NZS 60950-1, RoHS, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, GB 4943, EN 61000-4-29, CAN/CSA C22.2 No. 60950-1, Directive 2004/108/EC, ANSI C63.4-2009, EN 60825-2, EN 61000-3-3:2008, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-4-6:2009, EN 61000-4-11:2004, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, CISPR 24:2010, EN 55022:2010 Class A |
| Dimensions & Weight | |
|---|---|
| Width |
17.3 in |
| Depth |
14.2 in |
| Height |
1.7 in |
| Weight |
16.53 lbs |
| Environmental Parameters | |
|---|---|
| Min Operating Temperature |
32 °F |
| Max Operating Temperature |
113 °F |
| Humidity Range Operating |
10 - 90% (non-condensing) |
| Min Storage Temperature |
-40 °F |
| Max Storage Temperature |
158 °F |
| Humidity Range Storage |
5 - 95% (non-condensing) |
| General | |
|---|---|
| Device Type |
Switch - 48 ports - L3 - managed - stackable |
| Enclosure Type |
Rack-mountable 1U |
| Subtype |
Gigabit Ethernet |
| Ports |
48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ |
| Power Over Ethernet (PoE) |
PoE+ |
| PoE Budget |
1440 W |
| Performance |
Routing/switching capacity: 336 Gbps Throughput: 250 Mpps |
| Capacity |
IPv4 routing table entries: 32768 IPv6 routing table entries: 16384 |
| MAC Address Table Size |
32K entries |
| Jumbo Frame Support |
Yes |
| Routing Protocol |
OSPF, RIP, IS-IS, BGP, VRRP, PIM-SM, static IP routing, PIM-DM, OSPF for IPv6, OSPFv3, PIM-SSM, ECMP, RIPng, IS-ISv6, MPLS, Bidirectional Forwarding Detection (BFD) |
| Remote Management Protocol |
SNMP 1, SNMP, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, SSH-2, CLI |
| Authentication Method |
Secure Shell (SSH), RADIUS, TACACS, Secure Shell v.2 (SSH2) |
| Features |
Flow control, layer 3 switching, DHCP support, ARP support, MPLS support, auto-uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, IPv6 support, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Quality of Service (QoS), RADIUS support, Rapid Ring Protection Protocol (RRPP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), STP Root Guard, IPv4 support, Deficit Weighted Round Robin (DWRR), Strict Priority (SP), 802.1x authentication, Type of Service (ToS), MACsec support, Smoothed Deficit Weighted Round Robin (SDWRR), Virtual Private LAN Service (VPLS) |
| Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3at, IEEE 802.3az |
| RAM |
2 GB SDRAM |
| Flash Memory |
512 MB |
| Status Indicators |
Power, system, operation mode |
JH148A
16 other products in the same category:
HPE 5510 48G PoE+ 4SFP+ HI Switch (min. 1 PWR required) -